Direct-from-factory OEM/ODM architectural glazing solutions custom fabricated for high wind-load resistance, acoustic isolation, and thermal efficiency across commercial and luxury residential projects in Israel.
The architectural ecosystem in Israel presents one of the world's most demanding combinations of environmental factors, strict regulatory standards, and aesthetic expectations. From the dense, high-salinity coastal wind loads of Tel Aviv and Haifa to the extreme diurnal temperature swings of the Negev Desert and the stone-clad structural integration mandated in Jerusalem, standard catalog doors routinely fail to deliver long-term thermal, structural, and acoustic reliability.
As a senior OEM/ODM bi-fold and sliding door manufacturer operating from Turkey’s premier architectural aluminum extrusion hub, ALUCCO (GOMAX Ltd. Şti.) provides fully customized, project-driven fenestration engineering designed specifically to bridge the gap between European testing excellence (CE, EN 1026, EN 1027, EN 12211) and local Israeli building regulations (SI 5281). By controlling every link of the manufacturing value chain—from structural profile extrusion in 6063-T6 alloy to thermal break polyamide integration, multi-point Roto/STAC hardware pairing, and sea-freight crating—we empower Israeli developers, importers, and architects to execute ambitious panoramic glass designs without compromising on structural integrity or energy conservation.
Most imported bi-fold door systems suffer from two primary failure points when installed in Israel: coastal track corrosion due to airborne sodium chloride in Mediterranean zones, and profile thermal deflection (banana effect) caused by high radiant solar absorption on dark exterior frames in summer.
Our OEM/ODM engineering resolves these vulnerabilities by utilizing 24mm to 34mm Technoform® polyamide thermal barrier strips combined with dual-extruded EPDM gaskets and Qualicoat Class 2 / Qualanod C5-M marine-grade surface anodizing. This structural layout prevents heat transfer while accommodating up to 4.5mm of linear thermal expansion without binding the heavy-duty bottom roller carriages.
Verified technical parameters for custom OEM/ODM production runs destined for Israeli commercial and high-end residential developments.
| System Series | Frame Depth | Thermal Transmittance (Uw) | Air / Water / Wind Rating | Acoustic Insulation | Ideal Application in Israel |
|---|---|---|---|---|---|
| ALU-FOLD 75 Heavy Bi-Fold | 75 mm | 1.3 - 1.6 W/m²K | Class 4 / E750 / C4 | 38 - 42 dB | Coastal villas, beachfront restaurant patios in Tel Aviv & Herzliya |
| ALU-FOLD 88 Ultra-Thermal | 88 mm | 0.9 - 1.2 W/m²K | Class 4 / E900 / C5 | 42 - 46 dB | High-altitude luxury residences in Jerusalem & Safed |
| ALU-SLIM 100 Minimalist Slide | 100 mm (20mm sightline) | 1.2 - 1.5 W/m²K | Class 3 / 7A / C3 | 35 - 40 dB | Modern high-rise penthouse balconies & desert resorts (Eilat/Negev) |
| ALU-LIFT 120 Lift-and-Slide | 120 mm | 1.0 - 1.4 W/m²K | Class 4 / 9A / C5 | 40 - 45 dB | Large-scale wide-span openings up to 400kg leaf weight |
Our flexible Turkish manufacturing facilities allow Israeli contractors and distributors to order custom-engineered extrusions tailored to exact project blueprints.
We extrude 6063-T5 and T6 structural aluminum profiles with wall thicknesses ranging from 1.6mm to 3.0mm, accommodating oversized heavy-glass leaves up to 3.5 meters in height while retaining ultra-slim vertical sightlines.
Equipped with automated polyamide insertion lines, we integrate multi-cavity, foam-injected thermal breaks (PA66 GF25) that achieve low Uw values essential for compliance with Israel's SI 5281 energy budget calculations.
To resist coastal Mediterranean salt spray, our surface treatments include Qualicoat Class 2 powder coating (min. 60–80 µm) and Qualanod marine anodizing in custom RAL shades, textured metallic, and timber sublimation finishes.
We seamlessly pre-machine profiles for premium European hardware platforms—including ROTO Frank, STAC, Siegenia, and Sobinco—ensuring effortless glide mechanics, concealed multi-point locking, and child-safe operation.
From consolidated container packing in fumigated ISPM-15 wooden crates to elevation-coded labeling, our export division coordinates shipping direct from Istanbul/Izmir ports to Haifa and Ashdod with full customs dossiers.
Israel's diverse geography demands micro-climate specific fenestration design. Our OEM/ODM service adapts frame profiles, glazing matrixes, and sealing systems to match the precise environmental stresses of each region.
Challenge: Corrosive saline moisture and extreme Mediterranean wind pressure forces water through standard door weep holes.
ALUCCO Solution: Sub-floor continuous drainage channels combined with stepped EPDM triple gaskets, stainless steel grade 316 heavy-duty rollers, and laminated Low-E double glazing rated for C4/C5 wind resistance.
Challenge: Integrating slim aluminum frames into heavy Jerusalem stone reveals while handling sharp winter-to-summer temperature swings.
ALUCCO Solution: Deep frame depth thermal break profiles with customizable perimeter sub-frame flashings, dual-color powder coating (dark bronze exterior / warm ivory interior), and triple glazing reaching Uw 0.9 W/m²K.
Challenge: Extreme UV radiation, high ambient temperatures (40°C+), and sand dust infiltration leading to mechanism jamming.
ALUCCO Solution: Fully enclosed stainless steel ball-bearing roller tracks, solar-reflective spectrally selective Low-E argon-filled units (SHGC < 0.25), and dust-repellent nylon weather-stripping seals.
With Israel mandating SI 5281 compliance for all new residential and commercial developments, building envelopes must achieve strict thermal performance indices. High-performance aluminum folding doors with thermal break barriers significantly reduce total building energy consumption, earning vital credit points toward building certification.
Israeli residential culture places a premium on outdoor dining and terrace entertaining. Architects are increasingly replacing traditional static sliding doors with multi-panel bi-fold systems (up to 7 or 8 sashes) that fold entirely flat against adjacent walls, opening up 95%+ of the rough opening width.
Modern luxury developments in Tel Aviv favor ultra-narrow interlock profiles (20mm sightlines) combined with flush zero-step bottom thresholds. Our OEM engineering allows seamless floor integration with hidden water drainage pathways, satisfying both accessibility (ADA-compliant) and aesthetic demands.
Clear answers regarding OEM/ODM customization, testing compliance, logistics, and warranty terms for bi-fold door shipments to Israel.
Yes. Our thermal break folding door series are tested under EN 1026, EN 1027, and EN 12211, achieving thermal transmittance values (Uw) as low as 0.9 to 1.3 W/m²K when combined with Low-E double or triple glazing. These verified thermal metrics directly support SI 5281 energy efficiency scoring for residential and commercial projects across Israel.
We work on a project-consolidated basis rather than imposing rigid piece counts. Our standard export workflow accommodates mixed container loads—combining bi-fold doors, slim sliding doors, thermal break windows, and hardware accessories for a single villa, apartment floor, or multi-unit development.
All aluminum profiles designated for coastal installation undergo specialized surface prep before receiving Qualicoat Class 2 architectural powder coating or Qualanod marine-grade anodizing (20–25 microns). All exposed hardware, rollers, hinges, and fasteners are constructed from AISI 316 stainless steel or anodized marine alloy.
ALUCCO handles full export documentation—including EUR.1 movement certificates, CE declarations, detailed packing lists with elevation codes, and HS-coded commercial invoices. Goods are securely packed in fumigated ISPM-15 wooden crates, ready for smooth customs clearance and direct site delivery in Israel.
Absolutely. As an OEM/ODM manufacturer, we offer complete freedom of hardware selection. We maintain strategic supply partnerships with European hardware makers including ROTO Frank, STAC, and Siegenia, pre-milling all lock boxes and hinge points precisely on 5-axis CNC machining centers prior to finishing.
To prepare an itemized bill of quantities (BOQ), U-value calculations, and shop drawing proposals, we simply require your architectural elevations or door schedule in DWG or PDF format, along with your target glazing specification and project location wind pressure criteria.
Operating as the export division of GOMAX Emlak Gayrimenkul Insaat Dis Ticaret Ltd. Şti. in Turkey, ALUCCO provides structural engineering rigour, transparent manufacturing, and contract security for international procurement:
Send your elevation drawings or project window schedule to our engineering team. We will return a comprehensive system proposal, profile cross-sections, and project quotation within 72 hours.
