Certified fenestration and structural door assemblies manufactured for high-traffic Parisian commercial developments, retail flagships, and industrial infrastructure.
Designed for high-street boutique storefronts and high-pedestrian traffic office portals. Engineered with thermal break aluminum extrusion profiles and high-impact safety glass.
Ideal for medical facilities, laboratories, and educational institutions across Île-de-France requiring strict hygiene controls, fire resistance, and structural rigidity.
Minimal sightline architectural sliding systems for panoramic commercial terraces, hotel rooftops, and luxury mixed-use developments in Paris.
Certified EI30 / EI60 / EI120 fire-rated metal access door assemblies engineered to conform with French Code de la Construction et de l'Habitation.
Frameless frameless toughened glass entrance doors featuring heavy-duty hydraulic floor springs for smooth multi-directional operation in public buildings.
Heavy-gauge hollow metal doors for industrial complexes, schools, and logistics centers requiring extreme durability, impact resistance, and emergency escape certification.
Equipped with European-standard panic hardware (EN 1125), single and double egress configurations engineered specifically for high-capacity venue safety evac.
Weatherproof exterior fire doors with thermal barrier cores, anti-corrosion primer coating, and multi-point security locking for exterior stairwells and technical corridors.
The Greater Paris commercial real estate market—spanning the economic center of La Défense, the bustling retail corridors of Haussmannian Paris, and the massive urban expansions driven by the Grand Paris Express initiative—demands a sophisticated approach to architectural doors and envelope systems. Importing commercial doors into France requires more than off-the-shelf production; it calls for precise engineering alignment with RE2020 environmental standards, rigorous compliance with French safety classifications (ERP - Établissements Recevant du Public), and strict thermal-acoustic performance metrics.
As direct manufacturers and global exporters, our factory supplies custom-tailored aluminum entrance doors, steel fire-rated escape units, and minimal-frame sliding systems engineered specifically for French architectural mandates. By combining Turkish extrusion mastery with European test-report rigor, we bridge the cost-quality gap for Parisian contractors, façade engineers, and real estate developers.
Objective engineering parameters verified according to European Norms (EN) and international testing standards.
| System Category | Primary Material & Structure | Thermal Standard ($U_w / U_d$) | Fire / Safety Rating | Acoustic Rating ($R_w$) | Paris Market Target Application |
|---|---|---|---|---|---|
| Thermal Storefront Swing Door | Polyamide Thermal Break Aluminum (6063-T6) | 1.2 – 1.5 W/m²K | EN 12211 Class C4 / Pas24 | 35 – 40 dB | Champs-Élysées & Marais Retail Storefronts |
| Antibacterial HPL Swing Door | High-Pressure Laminate + Alum Honeycomb | 1.6 – 1.9 W/m²K | BS EN 13501-1 Class B-s1, d0 | 32 – 36 dB | Hospitals, Labs & Universities (ERP Class 1-4) |
| Slim Architectural Sliding System | Structural Aluminum Frame (Sightline 20mm) | 0.9 – 1.2 W/m²K | ESG Toughened / VSG Laminated | 38 – 44 dB | La Défense Corporate Rooftops & Terraces |
| Hollow Metal Fire Exit Door | 1.5mm Galvanized Steel + Rockwool Core | 1.4 W/m²K | EN 1634-1 EI30 / EI60 / EI120 | 36 – 42 dB | Subway Stations & Multi-Storey Car Parks |
| Frameless Floor Spring Assembly | 12mm/15mm Clear Toughened Safety Glass | N/A (Single Glazed) | EN 12150-1 Safety Toughened | 28 – 32 dB | Internal Office Atriums & Commercial Foyers |
Tailoring fenestration and entrance doors to the specific structural and aesthetic demands of Parisian districts.
Locations: Le Marais, Boulevard Haussmann, Avenue des Champs-Élysées.
Challenge: Integrating maximum glazing transparency with robust burglar resistance (RC2/RC3) and ultra-smooth pedestrian throughput.
Solution: Heavy-duty thermal break aluminum storefront doors paired with floor springs and high-security multi-point solenoid locks, finished in architectural anodized or PVDF Qualicoat textures.
Locations: La Défense, Issy-les-Moulineaux, Saint-Denis Pleyel.
Challenge: Meeting RE2020 low-carbon footprint and stringent wind load resistance under extreme pressure profiles at high elevation.
Solution: Structural slim slider patio doors with triple glazing units ($U_w \le 0.9\text{ W/m}^2\text{K}$) for executive sky lounges, alongside automated entrance swing doors rated for high wind permeability (EN 1026 Class 4).
Locations: Grand Paris Express transit hubs, hospitals, university campuses.
Challenge: Mandatory emergency egress evacuation hardware (EN 1125), fire division barriers, and anti-microbial surfaces.
Solution: Certified steel fire safety access doors with integrated push-bar panic hardware, along with moisture-proof, antibacterial HPL aluminum honeycomb interior doors.
Insights driving product specification for Parisian architects, general contractors, and export sourcing managers.
The entry into force of the French RE2020 environmental regulation has elevated thermal efficiency expectations for all exterior building envelope openings. Commercial projects now mandate polyamide thermal break strips of 24mm to 34mm width, warm-edge spacer bars, and low-emissivity double or triple glass assemblies to minimize operational carbon emissions.
Under French public safety codes (ERP Category 1 through 5), commercial properties must install certified fire-rated barrier doors along evacuation routes. Standardized requirements call for EI30 (30-minute integrity & insulation) up to EI120 ratings, equipped with drop-down bottom smoke seals and electromagnetic hold-open devices linked to central fire detection systems.
In central Paris (Arrondissements 1 through 8), strict urban heritage guidelines (ABF - Architectes des Bâtiments de France) require street-facing commercial entrance doors to mimic classic aesthetics while containing ultra-modern thermal profiles, concealed hinges, and electronic access controls.
Removing risk from cross-border manufacturing, technical engineering, and containerized logistics.
We evaluate architectural DWG/PDF schedules, verify wind loads, and calculate precise thermal transmittance ($U_w$) values prior to cutting aluminum profiles or fabricating door leaves.
Every door order includes complete technical documentation: CE Declarations of Performance (DoP), EN 1026/1027/12211 air-water-wind reports, and Qualicoat powder coating certificates.
Products are packed into ISPM-15 fumigated wooden crates with elevation-coded labels, corner protection, and silica moisture absorbers for sea freight or direct trucking to France.
Clear, technical answers to common questions regarding lead times, compliance, and custom manufacturing.
Our thermal break commercial aluminum doors achieve $U_w$ values ranging from 1.5 W/m²K with standard double glazing down to 0.9 W/m²K when configured with 34mm polyamide break strips, warm-edge spacers, and argon-filled triple low-E glazing. We provide project-specific thermal calculations during the technical proposal phase.
Yes. Our commercial steel fire doors undergo rigorous testing under EN 1634-1 (and UL 10C standards) to provide EI30, EI60, EI90, and EI120 fire resistance ratings. Each assembly comes equipped with intumescent perimeter seals, high-density rockwool cores, and CE-marked fire hardware.
Absolutely. We operate on a project-based custom manufacturing model. Aluminum profiles can be finished in any RAL powder coating (minimum 60 µm thickness, Qualicoat certified), anodized finishes, or dual-color powder coating (different interior/exterior colors). Frame dimensions are custom-built to match your architectural shop drawings.
Standard manufacturing lead time is 3 to 4 weeks upon approval of technical shop drawings. Freight can be arranged directly via ocean FCL/LCL to ports such as Le Havre or Marseille, or via direct consolidated overland trucking to construction sites across the Île-de-France region within 7 to 10 days transit time.
We integrate certified European panic exit hardware conforming to EN 1125 (for panic bars on public emergency exits) and EN 179 (for emergency handle devices). Additional options include heavy-duty door closers, concealed floor springs, electric strike locks, and card-access electromagnetic locks.
Every commercial door unit undergoes a multi-layer protective wrap (protective film, foam edge corner guards, plastic banding) before being secured inside heavy-duty ISPM-15 fumigated wooden crates or steel-framed A-frame racks. Crates are clearly labeled with elevation tags to facilitate floor-by-floor site distribution.
Submit your architectural elevations, door schedules, or project specifications. Our engineering desk will deliver a complete bill of quantities, system recommendations, and thermal calculations within 72 hours.
Contact Us