CE-certified, thermally insulated aluminum windows, minimal sliding doors, bi-fold patio systems, and skylights engineered for Italian building standards and energy efficiency codes.
From historic retrofit projects in Brera and Navigli to cutting-edge commercial towers in Porta Nuova and CityLife, aluminum facade systems must withstand Lombardy's microclimate while respecting stringent Italian energy regulations.
Milanese urban density requires slim, custom-extruded aluminum profiles that replicate traditional narrow sightlines of classic Italian timber frames, while incorporating 34mm polyamide thermal breaks. Ideal for apartment renovations along Corso Magenta or Via Torino, offering up to 48 dB acoustic reduction against street noise.
For high-end villas surrounding Lake Como, Monza, and Bergamo, our minimal-frame lift-and-slide glass doors maximize alpine panorama views. Equipped with triple Low-E coated glass, argon gas filling, and warm-edge spacers to easily satisfy Italian D.M. 26/06/2015 energy efficiency decrees for Climate Zone E.
Engineered for high wind load pressure (≥ 2.4 kPa) experienced in elevated commercial structures. Prefabricated unitized panels allow rapid job-site installation in congested metropolitan zones without scaffolding, significantly cutting labor costs for Italian general contractors.
Northern Italy’s Po Valley presents a distinct climatic challenge: hot, humid summers requiring solar control heat rejection, combined with cold, damp winters requiring minimal thermal conductivity.
Our aluminum facade extrusions utilize PA66-GF25 reinforced polyamide strips and multi-cavity insulation profiles. When combined with double or triple silver Low-E glazing, our curtain wall systems eliminate thermal bridging, prevent internal condensation, and slash HVAC operational costs by up to 35%.
Send an InquiryUnderstanding the intent of modern European architects, real estate developers, and facade consultants.
Italy’s public and private sectors are mandating Criteri Ambientali Minimi (CAM) compliance. Our factory supplies aluminum extrusion profiles manufactured with over 75% recycled aluminum billets, supported by verified Environmental Product Declarations (EPD) to help your project achieve BREEAM Outstanding and LEED Gold certification.
The contemporary Italian luxury residential market demands invisible architectural hardware. Our minimal glass sliding systems feature structural interlocks as narrow as 20mm, flush floor sills for seamless indoor-to-outdoor transitions, and concealed smart-home electric actuators.
Facade engineering in Milan is increasingly combining glass curtain walls with integrated bioclimatic louvers, motorized guillotine glass partitions, and ventilated terraced facade panels. This holistic approach manages solar heat gain while optimizing natural day-lighting.
Independent European Test Standard Ratings (EN 1026, EN 1027, EN 12211, EN 14351-1, EN 13830)
| System Architecture | Profile Structural Depth | Thermal Transmittance (Uw / Ucw) | Air Permeability (EN 1026) | Watertightness (EN 1027) | Wind Load Resistance (EN 12211) | Optimal Italian Application |
|---|---|---|---|---|---|---|
| Stick Curtain Wall System (SG / Capped) | 50 mm / 60 mm Sightline | 1.2 – 1.6 W/m²K | Class 4 (600 Pa) | RE 1200 (1200 Pa) | 2.4 kPa (Design Load) | Milan Commercial Office Towers, Showrooms |
| Unitized Modular Curtain Wall | 150 mm – 220 mm Depth | 0.95 – 1.3 W/m²K | AE 1500 (1500 Pa) | RE 1500 (1500 Pa) | 3.0 kPa (Safety Load) | High-Rise Urban Infill & Skyscrapers |
| Thermal Break Tilt & Turn Window | 70 mm – 85 mm Frame | 0.85 – 1.2 W/m²K | Class 4 (600 Pa) | Class E900 (900 Pa) | Class C5 (2000 Pa) | Lombardy Luxury Apartments & Renovations |
| Minimal Frame Lift & Slide Door | 160 mm Frame / 20 mm Interlock | 1.1 – 1.4 W/m²K | Class 4 (600 Pa) | Class 9A (600 Pa) | Class C4 (1600 Pa) | Lake Como & Suburban Residential Villas |
| Bioclimatic Pergola & Guillotine Glass | 200 mm Beam System | N/A (Outdoor Living) | Class 3 | Class 8A | Wind Class 3 (120 km/h) | Hotel Terraces, Rooftop Bars & Restaurants |
We bridge raw aluminum extrusion manufacturing with strict European structural compliance, delivering fully tested and crated facade packages to your site in Italy.
All extruded profiles undergo automated 6-stage surface pretreatment and Class 2 superdurable powder coating (minimum thickness 60 μm) or electro-anodizing to withstand urban pollution and industrial sulfur atmospheres.
Glazing units and assembled window elements are packed inside custom wooden crates with steel corner protection, interior moisture desiccants, and individual elevation coding for seamless floor-by-floor site distribution in Italy.
Our structural engineers review your architectural drawings, conduct wind load calculations according to Eurocode 1 (EN 1991-1-4), and provide detailed CAD section drawings prior to cutting a single profile.
Before shipment, representative facade modules undergo hydrostatic chamber testing to guarantee Zero water penetration at pressures exceeding 1,000 Pa. Double-crimped PA66 thermal breaks are tested for shear strength and tensile endurance to ensure 30+ year service life.
Send an Inquiry.webp)
Addressing procurement, certification, logistics, and technical specifications for importing aluminum facades into Milan and Lombardy.
Our thermal break window and curtain wall profiles feature PA66 polyamide insulation strips ranging from 24mm to 39mm. Combined with warm-edge spacers and Low-E double or triple glazing, our overall window U-values (Uw) reach between 0.85 and 1.3 W/m²K, easily surpassing the maximum allowable thermal transmittance thresholds specified for Climate Zones E (Milan, 1.3 W/m²K) and F.
We provide a complete technical dossier with every export shipment, including CE Declarations of Performance (DoP) under EN 14351-1 (Windows/Doors) and EN 13830 (Curtain Walls), EN 1026/1027/12211 test certificates, Qualicoat coating guarantees, glass technical datasheets, and ISPM-15 phytosanitary wood packaging certificates.
Yes. We offer complete architectural coating customization including full RAL color ranges, textured architectural matte finishes, dual-color extrusions (different interior/exterior finishes), anodized finishes (EURAS/EWAA standard), and high-resolution wood-effect heat transfer sublimation for traditional aesthetic harmony.
Manufacturing typically takes 3 to 4 weeks following shop drawing approval. Sea freight from our port facility to Genoa or Trieste takes approximately 5 to 7 days, followed by direct truck transport to your job site in Milan, Brescia, or Bergamo. Total turnaround from order confirmation to site delivery is usually under 6 weeks.
Yes. Our engineering department performs structural stress analysis, deflection calculations (L/200 or 15mm max), anchor fixing calculations, and wind load assessments in accordance with Italian NTC 2018 (Norme Tecniche per le Costruzioni) and Eurocode 1.
We operate on a project basis rather than strict piece counts. A consolidated container load (20ft or 40ft FCL) combining windows, sliding doors, curtain wall extrusions, and hardware for a multi-family building or commercial project is the most cost-effective starting point. Mixed sample loads are also supported for qualified developments.
Send your CAD drawings, DWG elevations, or project schedules. Our technical engineering team will return a comprehensive system proposal, structural calculation, and detailed bill of quantities within 72 hours.
Strict Confidentiality Direct Factory Quotation CE & EN Compliance Guaranteed
