Engineered to European EN standards with proven thermal performance, air tightness, and structural wind resistance for global commercial and luxury residential projects.
Ultra-low U-value lift-and-slide system engineered for extreme weather resistance, incorporating PA66 thermal barriers and triple insulated glazing.
Heavy-duty vinyl sliding system integrated with premium German ROTO multi-point locking gearboxes for maximum acoustic isolation and security.
Architectural balcony sliding doors featuring slim sightlines, precision stainless steel track rollers, and superior solar heat gain control.
High-load top-hung bi-fold mechanism with concealed heavy-duty hinges designed to satisfy strict AS2047 structural and water testing criteria.
Ultra-narrow 20mm interlock vertical frame design with concealed ceiling mounting track for seamless high-end architectural transitions.
Motorized roof hatch window engineered with integrated linear actuators, dual EPDM weather seals, and toughened laminated thermal glass.
Multi-rail structural aluminum slide system allowing wide clear openings, integrated flyscreens, and high anti-burglary resistance hardware.
Commercial-grade aluminum profile system offering reinforced structural mullions, surface anodizing finish, and smooth whisper-quiet operation.
In modern architectural fenestration, the operational integrity, thermal performance, and lifespan of a window system depend fundamentally on the quality of its mechanical fittings and profile engineering. A window frame is only as robust as its hardware assembly. CE certification under the European CPR (Construction Products Regulation No 305/2011) and compliance with EN 14351-1 are not merely regulatory formalities; they serve as validated benchmarks for structural wind load resistance, air permeability, watertightness, and mechanical durability.
As a leading project-driven manufacturing and export house based in Turkey's strategic aluminum extrusion hub, ALUCCO (GOMAX Emlak Gayrimenkul Insaat Dis Ticaret Ltd. Sti.) integrates high-tier extrusion engineering with world-class hardware systems including ROTO, STAC, Mitacco, Saray, ASAS, and Cuhadaroglu. Our technical team evaluates architectural DWG schedules against regional climate requirements to deliver fully tested, crated, and site-ready window systems.
Class 4 certification ensuring near-zero air leakage under positive and negative pressures up to 600 Pa.
Rated up to Class E750/9A, preventing water ingress under continuous heavy deluge conditions.
Structural stability up to Class C5/P3 (2000 Pa wind pressure), engineered for high-rise coastal facades.
Below is a comparative breakdown of key window fitting specifications across different architectural opening typologies supplied for commercial and residential developments:
| System Category | Profile Depth | Thermal Transmittance (Uw) | Hardware Mechanism | Max Leaf Weight | CE Test Compliance |
|---|---|---|---|---|---|
| Thermal Break Casement & Tilt-Turn | 60 mm – 75 mm | 1.3 – 1.8 W/m²K | Concealed Hinges / ROTO Tilt-First | 130 kg / leaf | EN 1026 / 1027 / 12211 |
| Passive-Spec Triple Glazed Window | 80 mm – 95 mm | 0.9 – 1.2 W/m²K | Heavy Duty Multi-Point Lock | 160 kg / leaf | CE EN 14351-1 / Passive House |
| Lift-and-Slide Patio Door | 76 mm – 110 mm | 1.2 – 1.6 W/m²K | Tandem Rollers & Gearbox | 400 kg / leaf | Class 4 Air / Class 9A Water |
| Slim Minimalist Sliding Partition | 20 mm Interlock | 1.4 – 2.0 W/m²K | Concealed Bottom Track Rollers | 250 kg / leaf | Wind Load Class C3 |
| Motorized Roof Access Skylight | 85 mm Thermal Frame | 1.1 – 1.5 W/m²K | Linear Electric Actuators (IP65) | 200 kg total | EN 12101 Smoke/Heat & Water |
Navigating cross-border fenestration procurement requires absolute clarity regarding raw material standards, alloy compositions (typically EN AW-6063 T6 aluminum), surface finishes, and hardware tolerances. Working with ALUCCO eliminates supply chain friction through comprehensive project-level engineering oversight.
.webp)
We analyze DWG/PDF elevations to match profile wall thickness and reinforcement steel to destination wind zones.
Freedom to select optimal hardware and extruders without being tied to restrictive distributor inventory.
Every shipment includes original CE declarations, test certificates, EUR.1 movement forms, and itemized packing manifests.
The global architectural fenestration landscape is undergoing a rapid paradigm shift driven by stringent decarbonization policies, smart building integration, and supply chain re-alignment. Importers, facade contractors, and real estate developers must align their procurement strategies with four key industry trends:
With strict energy codes like the EU Energy Performance of Buildings Directive (EPBD) demanding lower building envelope carbon footprints, non-thermal break aluminum frames are being phased out in commercial projects. The industry is moving toward wider glass-fiber reinforced polyamide strips (34mm to 54mm PA66 GF25) filled with expanded polyolefin (PE) insulating foam, pushing window system overall U-values (Uw) down into Passive House territories below 0.8 W/m²K.
Modern luxury residential design demands invisible framing and effortless operation of massive glass panes weighing up to 500 kg. Future procurement prioritizes multi-rail sliding doors equipped with brushless DC motor actuators, electromagnetic locking pins, and concealed hinges that maintain flush interior wall profiles while integrating with KNX and smart-home automation networks.
Corporate sustainability directives now penalize high-embodied-carbon building materials. B2B buyers are demanding primary aluminum extruded using renewable hydroelectric power (yielding under 4.0 kg CO2 per kg of aluminum), alongside Qualicoat Class 2 weather-resistant powder coatings that withstand 3-year Florida climate exposure tests without chalking or color degradation.
Global logistics bottlenecks have emphasized the strategic value of Turkey as a regional extrusion powerhouse. Positioned at the crossroads of Europe, the Middle East, and the Americas, Turkish manufacturing facilities provide rapid 7-to-14 day maritime transit to Mediterranean and European ports with zero custom tariffs under EU customs union agreements, presenting a high-efficiency alternative to East Asian supply routes.
Answers to key technical, regulatory, and logistics queries compiled by our facade engineering team for international buyers.
Depending on profile depth, polyamide thermal break width, glass build-up, and spacer bar selection, our aluminum systems range from Uw 1.8 W/m²K (standard double glazing with 24mm thermal break) down to 0.9 W/m²K (high-insulation 85mm profile with triple glazing, Low-E coating, warm-edge argon gas filled spacers). We perform ISO 10077-1 thermal simulations for your exact elevation dimensions prior to manufacturing.
All supplied window profiles, hardware mechanisms, and glass units are manufactured under ISO 9001 quality systems and tested according to EN 14351-1. Test dossiers include laboratory reports for Air Permeability (EN 1026), Watertightness (EN 1027), and Wind Load Resistance (EN 12211). Official Declaration of Performance (DoP) documents and CE mark tags are supplied with every shipment dossier.
We operate on a project-based model rather than arbitrary piece counts. A consolidated 20ft or 40ft container load—combining windows, sliding patio doors, curtain wall profiles, and matching hardware for a complete villa or apartment development—is the most cost-effective starting point. Mixed container loads are fully supported.
To prepare a comprehensive engineering offer and bill of quantities (BOQ), please provide architectural elevation drawings in DWG or PDF format, window schedules indicating opening types and dimensions, target thermal U-values, and the project's geographical location (to calculate local wind load pressure requirements).
Every fabricated unit undergoes edge corner protection, heavy PE stretch wrapping, and vertical loading inside ISPM-15 certified fumigated wooden crates. Glass units are packed on heavy-duty steel A-frames with moisture-absorbing silica gel packs. Crates are systematically labeled by elevation tag (e.g., W-01, D-04) to allow seamless unloading and floor-by-floor site distribution.
Yes. Profiles can be specified in any standard RAL or NCS powder coat color (minimum 60 µm film thickness), metallic architectural textures, wood-grain sublimation transfers, or anodized finishes ranging from 15 to 25 microns (silver, bronze, black, gold). Dual-color thermal break extrusions (different interior and exterior colors) are standard options.
Submit your architectural elevations, DWG schedules, or project specifications. Our structural engineers will deliver a complete technical dossier, U-value calculations, profile sections, and competitive factory pricing within 72 hours.
Contact Us